How To Install New Wax Seal On Toilet
Call Today!!! 408-282-7026
Wax Rings
Wax Rings
Y'all may have heard of wax rings before. Y'all may even know that they go between the bottom of the toilet, and the cupboard flange (the flange in the flooring)… but do y'all know what they are really for?
The common misconception is that they are meant to provide a leak-proof seal between the toilet and the floor. The truth is that while they do keep the toilet water from splashing onto the floor, they are not really designed to provide a "leak proof" seal. The bodily function of a wax band is to provide an aroma proof seal.
A toilet has an internal trap, that holds water and keeps the sewer gases out. A seal also needs to be placed betwixt the sewer and the toilet, and that is what the wax ring does. If yous take ever had a chief sewer line backup, and saw water leaking from under your toilet, that does not mean that the wax ring was bad. It just means it was not designed to keep the h2o out… at least non water with any force (or weight) behind information technology.
What Might Cause a Wax Band to Go Bad?
Wax rings can go bad for a number of reasons, although age is not usually one of them. Really, in ideal conditions, a wax ring should never become bad. There are, all the same some things that may cause them to no longer part properly.
Ane very common cause of wax band issues is loose toilets. If the toilet is non firmly mounted, or gets loose to the betoken where information technology rocks a bit, it can cause the wax ring to lose its seal. When installed, a wax ring is compressed to fit the flange and the toilet, creating the seal. If a toilet rocks, the wax ring is already washed compressing, and may not recoup for the movement.
I mentioned the mainline backup scenario earlier. If water has seeped by your toilet, onto your floor, you will want to replace the wax ring. Once the h2o seeps past it, the seal is pretty much lost. If you have your toilet removed for some reason, you lot should always supplant the wax ring. Never reuse 1.
Other problems that may occur is when at that place are problems with the closet flange… specifically the height in relation to the toilet. This is very common in homes with tile floors. If the domicile was built with a thin floor covering (such as linoleum), installing tile or other thicker floor roofing will exit the closet flange low. This creates an increased space between the toilet and the flange.
When the space betwixt the toilet and the flange are too far autonomously for a wax ring to do a good job of compressing to fit, many people will attempt using two wax rings. Sometimes this works, and sometimes it does not. While it is the to the lowest degree expensive way to go virtually information technology, a better way would exist to use special flange heighteners to raise the flange summit and so that a proper seal tin can be fabricated with only i ring.
In that location you have it… everything you e'er wanted to know about wax rings, and then some. If y'all withal accept questions or are set up to replace yours, give Gogo Rooter Plumbing a call. We will have that pesky wax ring supervene upon in no fourth dimension!
Phone call 408-282-7026
Plumbing San Jose and the Surrounding Areas
Source: https://www.gogorooter.com/wax-ring-san-jose-replacement-installation/
Posted by: hamilscolon.blogspot.com
0 Response to "How To Install New Wax Seal On Toilet"
Post a Comment